Sekonic L-758DR User Manual download pdf (Page 54)

-48-

7. Camera Exposure Profiling

3. How to use Exposure Profiling mode

3-1 Selecting Camera Exposure Profiling

Preset Camera Exposure Profiles (Camera 1, 2 and 3) can be recalled.

1) Press and hold down the ISO 1 button ⑪ ,while

pressing the MID.TONE button ⑳ to select the

desired Camera profile (Camera 1, 2 or 3).

NOTE:

• Holding down the MID.TONE button first and

pressing ISO1 button makes the last

measurement value “Mid.Tone” as standard

value. Be sure to hold the ISO1 button first and

press the MID.TONE button to select the desired

camera profile.

3-2 Analog scale

The analog scale indicates the last measured value,

memorized, contrast, and averaged value, clipping

point and dynamic range on the LCD. As you can see

in the figure on the right, it is composed of four scales.

3-2-1 Aperture scale

The Aperture scale can be displayed in all mode except Aperture priority mode. Aperture

values are displayed as measured values (last measured value, memorized, contrast

and averaged value) on this scale.

3-2-2 EV scale

It can be displayed in all modes except mul-

tiple flash mode.Aperture scale or EV scale

can be switched by holding the Mode button

⑩ and pressing the AVE./⊿EV button ④.The

EV scale can display a memorized measured

value (ex.Incident reading) as a standard value

(Mid.Tone), and display it on the EV scale as

+/- 7EV from the MID.TONE in 1/3 step incre-

ments.

1) After taking a measurement by pressing the Measuring button ⑭ ,pressing either the

Memory button ⑦ ,MID.TONE button ⑳ or AVE./ ⊿ EV button ④ stores the measured

value as zero in the middle of the EV scale representing the MID.TONE value. Pressing

MID.TONE button will display a blinking “ ” on the scale. Pressing AVE./⊿EV button

will display a blinking “ ” on the scale.

If the MID.TONE button is not pressed,the measured value will be set automatically in

the middle of the EV scale.(See the section “3-2-3”)

Reference:

• In custom setting (see page 40), it is possible to select which value (last measurement,

first memorized value or last memorized value) will become the middle value on the EV

scale if the MID.TONE button is not pressed.

Memory button

Value display scale

EV scale

Clipping and Dynamic range icons

Aperture scale

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 67 68

Comments to this Manuals

No comments

Sekonic L-758DR User Manual Page 54

Comments to this Manuals

Related products and manuals for Cameras Sekonic L-758DR