Sekonic L-758DR User Manual download pdf (Page 50)

-44-

7. Camera Exposure Profiling

2. Input test target data

There are two ways to input the result of the test target data into the light meter: 1) Sekonic Data

Transfer Software - install application software from the included CD-ROM and connect the com-

puter and light meter via USB, and 2) Direct Input - Manually enter the test target data directly into

the light meter.

2-1 Sekonic Application Software

Data Transfer Software is included with the L-758DR, L-758D and L-758CINE. The Software

application CD-ROM includes the Data Transfer program for Exposure Profiling, USB drivers

and the software instruction manual. The Data Transfer program provides the following:

* Camera calibration compensation

* Dynamic range setting (+/-)

* Clipping point setting (+/-)

* Camera Exposure Profile data transfer (to the light meter from a computer via USB connec-

tion)

* Camera Exposure Profile data transfer (to the computer from the light meter via USB connec-

tion)

2-1-1 Outline of software

1) Sekonic Data Transfer Software Exposure Profiling Program offers several choices for

custom calibrating the L-758DR (L-758D or L-758CINE). Below is the flow chart of menu

selections within the program.

2) Up to 3 exposure profiles (cameras, type of compressed file, ect.) 2 light sources and 2

measuring methods can be selected and set for custom calibration. Each camera, light

source or measuring method is stored, recalled and displayed within the light meter's

internal software, once the data has been transfer to it.

3) Data can be entered into each of the setting parameters (Compensation Value, Dy-

namic Range +/- and Clipping Point +/-) individually or by using the "Two Points Input"

calculator. The "Two Point Input" calculator automatically computes two settings perim-

eters and sets all values from ISO 3 to ISO 8000.

Reference:

• For detailed information on Sekonic Data Transfer Software, please refer to the Software

Guide found on the Sekonic Application Software CD-ROM included with this product.

Exposure Profile (up to 3)

• Exposure Profile 1 (CAMERA 1)

• Exposure Profile 2 (CAMERA 2)

• Exposure Profile 3 (CAMERA 3)

Light source

• Ambient

• Flash

Measuring method

• Incident

• Reflected

ISO sensitivity

ISO3

∼

ISO8000

Contents of setting

• Compensation value

• Clipping point (-)

• Dynamic range (-)

• Dynamic range (+)

• Clipping point (+)

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 67 68

Comments to this Manuals

No comments

Sekonic L-758DR User Manual Page 50

Comments to this Manuals

Related products and manuals for Cameras Sekonic L-758DR